RSPSWP Load binder
The element for tension.
This load binder for two-part lashing chain systems in accordance with EN 12195‑3 is intended for the ZKWP lashing chain. It includes a pre-mounted shortening hook including safety catch and, depending on the selected lever length, all sizes are also suitable for frictional lashing (always take the STF value into account!).
As specified in the full operating manual, this load binder is not suitable for lifting or attaching loads. The lashing capacity is 50 % higher than for grade 8.
Thanks to the pre-mounted shortening hook, the load binder may be positioned anywhere in the ZKWP lashing chain. In short, this element is bound to create some tension!
Specificatie tabel
| Code / Type | LC lashing capacity [kN] |
STF Standard tension force [daN] |
length closed L [mm] |
length open L [mm] |
Tension range [mm] |
Lever length l [mm] |
Jaw size g [mm] |
weight [kg/pc.] |
|---|---|---|---|---|---|---|---|---|
| RSPSWP 7 | 47 | 1.900 | 618 | 760 | 142 | 237 | 10 | 4,60 |
| RSPSWP 8 | 60 | 1.900 | 617 | 759 | 142 | 237 | 10 | 4,90 |
| RSPSWP 10 | 100 | 3.000 | 697 | 837 | 140 | 355 | 13 | 6,70 |
| RSPSWP 13 | 160 | 2.500 | 1.009 | 1.298 | 289 | 359 | 17 | 15,70 |
